Rust-Oleum Mathys ND14 Cleaner Degreaser Reviews

Rust-Oleum Mathys ND14 Cleaner Degreaser Concentrated alkaline cleaner degreaser Removes grease, oil, proteins , dirt and many other contaminants from coated, mineral and steel substratesRust-Oleum Mathys Alkaline Cleaner/Degreaser ND14 should be used to remove grease, oil, proteins, dirt and many other surface contaminants from coated, mineral and steel substrates. Features and Benefits Non-flammable, virtually odour-free cleaning/degreasing solution. Can be used as an additive for high pressure and steam cleaning Applied by synthetic sponge, cloth, brush or broom Low concentration (3-5% is sufficient for most cleaning) Technical Data Density: 1,18 Theoretical Consumption The content of the concentrated 5 litre packaging will allow you to treat a surface of up to 500 m², based on a dilution of 1:20 Practical Consumption Practical usage depends on many factors such as type and amount of contaminants, shape of the substrate and material losses during application. Directions For Use To ensure homogeneity shake well before use. Scrape or sweep away grease, oil, dirt, mould and all other surface contaminations as much as possible. ND14 Cleaner/Degreaser can be applied diluted or concentrated with a sponge, cloth, brush or broom. For normal cleaning a 3 - 5% concentration will be sufficient. The product should be diluted with cold water. After use rinse with plenty of fresh water. If a concentration of more than 5% is used, hot water rinsing is absolutely necessary. As a high-pressure (steam) cleaning additive a 2% concentration is recommended. After cleaning, remove any remaining water and allow the surface to dry, as moisture left on the surface or entrapped into pores may cause premature failure of the coating system. Large surface areas or poor drying conditions may require longer drying times before a coating system can be applied. Application Conditions Temperature of air, substrate and material between 5 and 35°C. Remarks If used on galvanized steel, zinc, aluminum or anodized aluminum rinse the surface excessively. Safety Data  pH: 12 VOC level: 92 g/l Remarks regarding safety: Consult Safety Data Sheet and Safety Information printed on the can